Is it necessary to replace the natural gas filter?

Aug 26, 2025

Replacement Necessity

Filtering Impurities: Natural gas may contain impurities such as water, oil, rust, and particles. Filter elements use coalescing filtration technology to separate these impurities and prevent contamination of the gas system.
Safety Risks: Failure to replace filter elements for extended periods can lead to incomplete combustion, equipment blockage, and even gas leaks.
Performance Guarantee: Filter blockage increases differential pressure, reduces filtration efficiency, and affects gas flow stability and combustion performance.

The replacement cycle should be determined based on the following factors:

Usage Scenario:

City gas: Recommended replacement every 6 months or 10,000 kilometers.
Environments with high levels of impurities, such as oilfield/coalbed methane: Replacement should be reduced to 3 months or more frequently.
Mileage: Generally, replacement is recommended every 10,000-30,000 kilometers (longer if the gas source is clean).
Device Notice: When the filter differential pressure gauge indicator enters the red zone (usually exceeding 0.68 kgf/cm²), the filter should be replaced immediately.

Safety Procedure: Before replacement, close the valve and release the line pressure to avoid danger from high-pressure gas.
Regular Draining: Drain any accumulated liquid at the bottom of the filter every 3,000 kilometers or as needed.
Accessory Selection: Prefer reliable brand filter elements; inferior products may accelerate system contamination.

Pro:

Inquiry

You can send us your demands about filters, our technology team will give you our best solution.