Home > Products > Dust Solution > Dust Collection Filter Cartridge
Products

Dust Solution

Our filters not only improve air quality by removing harmful particles, but also help extend the life of your dust collection equipment by preventing clogging and damage. This ultimately saves money and increases productivity for your business.
Didn't find your industry solution? Consult our technical experts immediately.

Production Workshop

Modern Production Equipment

Our equipment is built to last, utilizing durable materials and reliable components to ensure long-term performance with minimal downtime. Our production equipment is easy to maintain and user-friendly, designed for maximum convenience and productivity.

Complete production process

The production workshop is fully equipped with the most advanced machines and technology from cutting, welding, spraying to assembly and testing.

Why Choose Us?

Xinxiang City Huahang Filter Co., Ltd is professional in the production of Hydraulic Filter, Air Filter and Pipe Filter.Product series range from Oil Filter, Air Filter, Water Filter, Polymer Filter,Candle Filter Element, Stainless Steel Filter to filter Coalescer and Separator. Product structure has tubular type, platy type, fold type, wraping type, sliding pillar type, frame type, cabas type, tank type and disc type, etc..

Tailored Customization for Operational Excellence

ISO-Certified Quality with End-to-End Testing

Scalable Production & Technological Innovation

Global After-Sales Support & Compliance Assurance

Our production equipment

Our equipment and product display

Our equipment and product display

Our equipment and product display

Our equipment and product display

Our equipment and product display

Our equipment and product display

Our equipment and product display

Our equipment and product display

Application

Application

Application

Application

Filters are essential for maintaining the efficiency, performance, and lifespan of machinery across various industries. By removing impurities and contaminants from liquids and gases, they help reduce maintenance costs, increase productivity, and ensure safe equipment operation. Whether in automotive, manufacturing, oil and gas, or residential environments, filters are indispensable components that play a vital role in modern engineering and technology.

Related Cases

Xinxiang City Huahang Filter Co., Ltd is professional in the production of Hydraulic Filter, Air Filter and Pipe Filter.Product series range from Oil Filter, Air Filter, Water Filter, Polymer Filter,Candle Filter Element, Stainless Steel Filter to filter Coalescer and Separator.

FAQ

How do I cross-reference my existing OEM part number to a Huahang element?

Send the OEM number plus one physical measurement. A part number alone is not enough to ship against.


* What we match on — Outside diameter, inside diameter, overall height, media grade, micron rating, end-cap and seal layout, bypass setting, collapse rating and flow direction.


* When the number is ambiguous — Superseded numbers, numbers shared across several machine builds, or an element that has clearly been substituted before. In those cases a photo of the housing nameplate and a caliper reading of the old element settle it.


* Why we insist — The most common return is not a wrong size. It is an element that fits the bore but seals on the wrong face.

What collapse or burst pressure can your elements take, and how does flow direction affect it?

Collapse rating comes from the core, not the media — and it only holds in service if two conditions are met.


* Typical ranges — A light return-line element with a perforated core around 10–25 bar; a pressure-line element with a heavy spiral core 100 bar and above; high-collapse designs higher still.


* Condition 1 — flow direction — Return elements are normally outside-in. Run one backwards and the pleat pack goes into tension, folds, and bypasses.


* Condition 2 — bypass setting — The housing’s bypass valve must crack below the element’s collapse rating. Otherwise a cold start or a neglected change-out crushes the element before the valve ever opens.

Can your elements handle fire-resistant fluids such as phosphate ester and EHC systems?

Yes, but the build changes, and this is exactly where a generic replacement fails.


* Seals — Move to FKM or PTFE. NBR swells and softens in phosphate ester.


* Media and bonds — Binder, pleat-seam adhesive and end-cap adhesive all have to resist ester attack; some phenolic resin systems do not.


* Water-based fluids (HFA, HFC) — A different problem again — free water, biological growth, and media that must not delaminate when wet.


* Expect a different ΔP — These fluids run at higher viscosity and lower lubricity than mineral oil, so the same element reads differently on the gauge.

What is the difference between an oil separator element and an oil mist separator?

Same job at different pressures: one works inside a compressor separator tank, the other on a breather or vacuum pump.


* Oil separator element — Removes oil aerosol from compressed air and returns the collected oil to the sump. Rated in mg/m³ carryover, typically a few mg/m³ for a healthy element.


* Oil mist separator — Comparable duty at near-atmospheric pressure, but sized on flow and oil type rather than on pressure.


* Saturation signals, common to both — Carryover climbing, oil consumption rising with no visible leak, ΔP trending up, and an element that comes out dark and varnished instead of evenly coated.

Sintered mesh, sintered powder or pleated stainless steel — how do I choose between them?

Choose on duty, not on price. The three constructions also fail in different ways.


* Sintered mesh : 2 to 5 diffusion-bonded wire layers — High strength, genuinely backflushable, cleanable surface, absolute ratings typically 3–100 µm. Best for catalyst recovery, amine and water service, and anything cleaned in place.


* Sintered powder : A true depth filter: narrow pore distribution, finer ratings (0.5–1 µm with titanium), more dirt capacity per unit area, better resistance to compressive load. The default for polymer melt, high-pressure gas and food or pharmaceutical duty where no fibre release is allowed.


* Pleated stainless : Woven wire cloth in a pleat pack — large area and low ΔP at high flow for coarse duty, and the lowest cost per square metre of area.

How do you ensure the quality and performance of the filter element?

Quality is our lifeline. We insist on:


Strict material selection: Use high-quality raw materials that meet industry standards.


Advanced technology: Use automated or precision-controlled production processes.


Multiple quality inspections: Implement full-process quality inspections from raw material storage to finished product delivery (including size, sealing, filtration efficiency, integrity testing, etc.).


Performance testing: Key products will undergo actual working condition simulation testing.


Compliance with standards: Our production and products comply with [e.g.: ISO 9001].


Customized verification: For customized filter elements, we will confirm key performance indicators with customers and provide test reports (if necessary).

Can metal cartridges be cleaned and reused, and how many cycles should I expect?

Yes . Reusability is usually the whole economic case, and it comes with two hard rules.


* Methods — Reverse-flow backflush at 1.5–2× service rate, ultrasonic cleaning in mild alkaline detergent, caustic or acid CIP, and calcination or steam for carbon and polymer residues.


* Never brush or scrape — That smears the pore structure and drives contamination deeper instead of out.


* Stay inside the chloride limit — 304 will pit at the weld in chloride-bearing water long before the media fails.


* Track the clean ΔP — Once it sits 30–50% above the original baseline, the pore structure is degrading rather than fouling — the cartridge is finished.

What is the difference between nominal and absolute micron ratings on metal media?

The two words are not interchangeable, and the gap between them is where process upsets come from.


- Nominal — Means 90–95% of particles above the stated size are retained, usually with no defined test method behind the claim.


- Absolute — Means 99.9% or better, verified by a defined method — bubble point to ISO 4003, glass-bead challenge, or a recognised particulate challenge.


- Ask which method — Metal ratings are normally derived from bubble-point pore size, so the method is the number.


- Why it matters — A mesh sold as 10 µm nominal will comfortably pass 25 µm particles. Irrelevant for a coarse strainer; fatal upstream of a spin pack or a membrane.

How do I specify a metal cartridge for polymer melt filtration?

Two numbers decide whether the cartridge survives: start-up ΔP, and collapse rating against the screen changer’s maximum.


* Process data — Polymer type (PET, PP, PA6, PE), melt temperature, viscosity at that temperature, throughput in kg/h, allowable pressure build-up.


* Hardware — Screen changer, spin pack or candle housing, with its pressure rating.


* Design on start-up, not steady state — Cold polymer can produce five to ten times the service differential pressure.


* No fibre release — Sintered powder or sintered mesh, not woven cloth, downstream of an extruder.

What do you need for a custom end connection, thread or flange?

Flange standards cause more rework than any other single item on a custom order.


* Dimensions : OD, ID, overall length, thread or flange specification and bolt circle. A drawing, or a photo with a caliper in frame, is enough.


* Connection and seal : M30×1, M36×2, BSP or NPT thread, ANSI or DIN flange, quick connector, bayonet — plus seal type and material.


* Duty : Media and rating, flow, allowable ΔP, temperature, pressure, quantity.

Which filter media should I use for my dust — polyester, anti-static, fiberglass, paper or non-woven?

Match the media to the dust chemistry and to how the collector cleans. Price is the last criterion.


- Polyester needle felt — to about 130 °C — General dry dust. The default choice, and the right starting point for most collectors.


- PTFE-laminated polyester — to about 130 °C — Fine or sticky fume, where dust must not key into the depth of the felt.


- Anti-static polyester, carbon or stainless fibre — to about 130 °C — Combustible dust, and any stream where charge build-up makes the cartridge hold dust it should have released.


- Fiberglass — to about 250 °C — High temperature, and any duty requiring H13 or H14 efficiency.


- Paper or cellulose — Coarse pre-filtration where cost dominates.


- Non-woven synthetic blends — Abrasive or moisture-laden streams.

Does a higher pleat count always mean better performance?

More pleats means more area — until the pleats crowd and cleaning can no longer reach the pleat root.


* What you gain — Lower face velocity, and therefore lower differential pressure at a given flow.


* What you lose — The gaps close under load, the cartridge blinds from the inside out, and the extra area is wasted.


* The metric that matters — Pleat pitch against dust loading: fine sticky dust wants wide spacing, free-flowing granular dust tolerates tight packing.


* Also check — Pleat depth against cage inside diameter. Deep pleats in a small cartridge fold over and create a dead zone that never cleans.

Why do my cartridges fail before their rated life, and how can I extend it?

Four modes account for most premature change-outs, and the fixes sit upstream of the cartridge.


* Media burst or abrasion — High inlet velocity, a missing deflector, or pulse pressure over about 6 bar at the venturi.


* Cage collapse — Differential pressure above rating, or water ingress.


* Adhesive or gasket failure — Temperature past the glue’s limit, or solvent attack.


* Rust-through — Galvanised cages in condensing streams.

What is the difference between a coalescer filter and a separator filter?

They are two distinct technologies often used together to remove liquids from a gas or liquid stream. The key difference is their core function:

* A Coalescer Filter merges tiny, invisible liquid droplets into large, heavy ones.

* A Separator Filter catches and drains those large droplets from the flow.

How They Work:

* Coalescer: The stream passes through a special media (like fine fibers). Microscopic aerosol droplets collide and merge (coalesce) into drops large enough to drain. It solves the problem of suspended mist.

* Separator: The flow then enters a chamber with baffles or vanes. The now-large droplets hit the surfaces, fall out by gravity, and collect in a sump. It provides the final, clean separation.

When do I need fiberglass or stainless instead of polyester, and how do I handle sparks?

Above roughly 130 °C continuous, polyester is out — and the gasket and cage need checking at the same time.

* Next step up — Fiberglass holds to about 260 °C; stainless or ceramic options go further.

* The weak link changes — Often the media survives and the glue line fails first, so the temperature rating must cover the whole assembly.

* Sparks — Welding, grinding, biomass boilers, foundry: a spark arrestor or pre-settling chamber upstream is mandatory. Fiberglass resists heat, not molten metal impingement.

* Condensing streams — Acid dew point corrodes cages faster than it destroys media, and a rusted cage collapses into the fan.

HOT Topics of Dust Collect Filters:

Q1: How can I find a replacement filter cartridge that perfectly matches the size of my dust collector?
A1: The most accurate method is to record the model number of the original filter cartridge. If that’s not available, please accurately measure the length, diameter, inner/outer diameter, and the type and size of the sealing cap of the filter cartridge. Our team can then help you find a precise match.

Q2: What do the filtration efficiency ratings (such as MERV, HEPA) of dust collector filter cartridges mean? How should I choose?
A2: MERV/HEPA are international standards for measuring the ability of filter media to capture particulate matter. A higher MERV value (e.g., MERV 15-16) indicates higher efficiency in filtering ultrafine dust. The choice should be based on your dust type (size, properties) and emission standards; higher efficiency isn’t always better, and you need to balance efficiency with equipment resistance.

Q3: What is a PTFE-coated air filter cartridge? It’s more expensive than a regular filter cartridge, is it worth buying?
A3: PTFE coating involves covering the surface of the filter media with an extremely fine polytetrafluoroethylene film, achieving surface filtration. Its advantages include extremely high dust removal efficiency, easier cleaning, and resistance to moisture and caking, making it especially suitable for handling sticky, wet, or ultrafine dust.
Although the unit price is higher, its longer service life and lower maintenance costs may result in a better overall cost in the long run.

Q4: How do I know when to replace the dust collector filter cartridge? Are there any clear replacement signals?
A4: The main replacement signals include:
1) The equipment pressure difference remains consistently high, even after cleaning, and quickly rises again;
2) Visible damage or perforations on the surface or inside the filter cartridge;
3) Visible dust emission from the discharge port, indicating that the filter cartridge has failed. We recommend establishing a system for regular inspections and pressure difference monitoring.

Q5: Is a higher number of pleats (e.g., 150 pleats, 240 pleats) always better for filter cartridges?
A5: Not necessarily. An increased number of pleats means a larger filtration area, theoretically leading to higher dust capacity and a longer service life. However, this needs to be matched with the cleaning capacity. Too many pleats can lead to overly narrow spacing between the pleats, making it difficult for the airflow to penetrate thoroughly during cleaning, thus affecting the cleaning effect and causing clogging. The appropriate number of pleats should be selected based on the equipment design.

Q6: Do you support custom-made non-standard sizes or special function dust collector filter cartridges?
A6: Yes, we do. We can customize non-standard sizes, special interfaces, anti-static, flame-retardant, waterproof, and oil-resistant filter cartridges according to your drawings or requirements. We offer flexible minimum order quantities; please feel free to contact us with your specific needs.

Q7: When purchasing dust collector filter cartridges, besides price, what other aspects should I focus on comparing?
A7: You should focus on the “total cost of ownership”:
1) Filter material quality and lifespan, which directly affect the replacement frequency;
2) Filtration efficiency and energy consumption; high-efficiency, low-resistance filter cartridges are more energy-efficient;
3) The supplier’s technical support capabilities, including their ability to help you select the correct model and solve problems.

Q8: Why would I need a custom-sized air filter instead of a standard one?
A8: Think of it like finding the right part for an older car. Standard filters are made for common housings. You need a custom air filter when your equipment doesn’t fit that mold. The main reasons are:

  • Perfect Seal, Zero Bypass: A filter that’s even slightly too small can let unfiltered air sneak around the edges, destroying its purpose. A custom size guarantees a tight seal.

  • Odd or Outdated Equipment: Many machines, especially older or specialized industrial models, use housings that don’t match today’s “standard” sizes. Finding an original replacement might be impossible or wildly expensive.

  • Space Constraints: Sometimes, the filter compartment has unique dimensions. A custom fit maximizes the filtration area within that specific space for better performance.

  • Performance Optimization: We can tailor not just the size, but the shape and pleat design to achieve the ideal balance of airflow and dust-holding capacity for your specific system.

Q9: How do different filter materials (Polyester, Paper, Microglass) affect performance?
A9: The filter media is its engine. Choosing the right one is critical for results and cost.

  • Polyester Fabric (Felt): The durable, cost-effective workhorse. It’s thick, often washable/reusable, and excels at catching large volumes of coarse dust (sawdust, plastic flakes). Great for high-dust workshops where long life and low cost-per-cycle matter.

  • Paper (Cellulose): The standard disposable option. It’s cheap and provides good initial efficiency for general dust. Its big weakness is moisture – it can tear or collapse if it gets damp. It’s for light-duty, dry, and cost-sensitive jobs.

  • Microglass Fiber: The high-efficiency specialist. Made from extremely fine glass fibers, it creates a dense web that captures very fine particles (smoke, fumes, powder). It’s for applications needing superior air purity, but it’s usually disposable and more expensive.

In short: Need a tough, washable filter for wood chips? Choose Polyester. Filtering dry, general dust on a budget? Paper works. Capturing fine cement powder or chemical mist? Microglass is necessary.

Q10: Can custom air filters handle harsh conditions like high heat or humidity?
A10: Absolutely. This is where customization shines. A standard, off-the-shelf filter might fail. We can engineer a solution by selecting special materials:

  • High Temperatures: Standard polyester melts. We can use high-temp resistant fibers (e.g., specific synthetics or fiberglass media) that won’t degrade.

  • High Humidity/Moisture: Paper filters fall apart. We specify hydrophobic (water-repelling) media like treated polyester or certain synthetic membranes that won’t absorb water and clog.

  • Chemical Exposure: For corrosive fumes, we can recommend chemically inert media like PTFE-coated layers.
    By telling us your exact operating environment, we build a filter that can survive and perform in it.

Q11: How do I choose the right filter based on dust type (Coarse vs. Fine)?
A11: The dust type dictates the filter’s “strategy.”

  • For Coarse, Heavy Dust (wood chips, metal grindings, grain):

    • Focus on: Dust Holding Capacity and Durability.

    • Choose: A thick, depth-loading media like Polyester Felt. Its deep pockets store a lot of debris. Look for a pleated design for more surface area. These filters are often cleanable.

    • Micron Rating: A higher rating (e.g., 50+ microns) is often sufficient, as the goal is to stop the bulky material.

  • For Fine, Light Dust (powdered ingredients, silica dust, pollen):

    • Focus on: Filtration Efficiency.

    • Choose: A dense, surface-loading media like Micro glass Fiber. It creates a fine mesh to trap tiny particles. A nanofiber coating on a polyester base is another excellent option for fine dust.

    • Micron Rating: You’ll need a lower rating (e.g., 10 microns or less). The filter will clog on the surface, so it needs to be easy to clean via pulse-jet systems.

373-5471699
info@huahangfilter.com
+86 16690927259

    X