Home > Products > Metal Cartridge > Sintered Filter > Stainless Steel Sinter Mesh Filter > 100 Mesh M20x1.5 Sintered Metal Mesh Filter 40×60

100 Mesh M20x1.5 Sintered Metal Mesh Filter 40×60

Type
Sintered Mesh Filter Element
OD
40 mm
Height
60 mm
Filter material
Stainless steel mesh
Connection
M20x1.5 internal thread
Filtration rate
100 mesh
Custom made
Available
Share:
Products Description
Specification
Features

Products Description

The M20x1.5 sintered metal mesh filter is a precisely engineered, compact in-line filter designed to provide reliable protection for confined fluid and gas systems. Featuring a M20x1.5 internal thread connection, this robust filter allows for direct and convenient installation onto externally threaded pipes or equipment ports, minimizing potential leak points and saving valuable space. Its compact design provides the durability and superior performance of a sintered metal filter in space-constrained applications.

Constructed from high-grade stainless steel wire mesh using a diffusion welding process, the filter forms a single, porous structure with excellent particle retention capabilities, mechanical strength, and resistance to pressure shock. It is an ideal solution for protecting sensitive instruments, small valves, and critical process points from particulate contamination.

Specification

Type Sintered Mesh Filter Element
OD 40 mm
Height 60 mm
Filter material 304/316 (L) Stainless steel
Filtration rate 100 mesh
Brand Huahang Filter
Connection M20x1.5 internal thread
Package Neutral carton package

This is a customized sintered mesh filter. If you have need of this filter, please contact us for the best price.

Features of Stainless Steel Sintered Mesh Filter

Monolithic Sintered Mesh Construction: Multiple layers of stainless steel wire mesh are diffusion-bonded to form a single, rigid porous structure. This ensures stable pore size, high mechanical strength to withstand pressure surges, and eliminates the risk of media migration or delamination.
Precise & Reliable Filtration: Offers consistent surface and depth filtration with a uniform pore size rating. Effectively captures and retains particulate contaminants, protecting downstream valves, orifices, sensors, and actuators from wear, clogging, and malfunction.
Integrated External Thread Design : Features a machined external male thread for direct screw-in installation, eliminating the need for separate adapters or fittings in many applications. This design saves space, reduces potential leak points, and ensures a secure mechanical connection.
Superior Durability & Cleanability: Made entirely of corrosion-resistant stainless steel, it is suitable for a wide range of fluids and operating temperatures. The rigid sintered element can be repeatedly cleaned via backwashing, ultrasonics, or chemical methods for extended service life.
Compact Form Factor: The small footprint allows for easy integration into tight spaces within complex assemblies, instrument panels, or mobile equipment without compromising on filtration performance.
Didn't find your industry solution? Consult our technical experts immediately.

Manufacturer & Supplier of Sintered Filter

Huahang Filter is a specialized manufacturer with deep expertise in sintering technology and industrial filtration solutions. Our focus is on engineering reliable, high-performance metal filters. We control the manufacturing process from raw material selection to final quality testing, ensuring each element meets precise specifications for pore size, strength, and durability. Our team supports customers with technical selection and customization to ensure the filter integrates seamlessly and performs reliably in your specific application.

FAQs of The Sintered Filter

Q1: How does the sintered mesh filter differ from a standard pleated filter cartridge?
A1: The difference is fundamental. A pleated cartridge typically uses a non-woven media with a nominal rating. Our sintered mesh provides an absolute 20μm rating. Furthermore, the pleated cartridge is disposable, while the sintered mesh element is a durable, cleanable asset designed for hundreds of service cycles, offering a lower total cost of ownership for demanding applications.

Q2: What is the best method to clean this filter, and how do I know it’s clean?
A2: For most applications, ultrasonic cleaning followed by a clean water or solvent rinse is highly effective for removing embedded particles. Backflushing with clean compressed air or liquid is also common. A well-cleaned filter will restore its initial, clean pressure drop when tested with a clean fluid. A significant, irreversible pressure drop indicates the end of its usable life.

Q3: Why choose 304 stainless steel over other materials like 316L?
A3: 304 stainless steel (SS304) offers an excellent balance of corrosion resistance, mechanical properties, and cost for a vast majority of industrial applications involving water, oils, hydraulic fluids, and many chemicals.
Choose 316L stainless steel primarily if your process fluid contains high levels of chlorides (e.g., saltwater, certain acids) where its molybdenum content provides superior pitting resistance.

Q4: Can you provide customized sintered filter?
A4: Yes. We can not only provide the standard size, but also the customized filters. We routinely modify end cap designs (e.g., add NPT threads, O-ring grooves, or flanges) and can adjust the overall length or even the filtration rating to meet your specific system integration requirements and performance goals.

Related Products

Related Cases

Xinxiang City Huahang Filter Co., Ltd is professional in the production of Hydraulic Filter, Air Filter and Pipe Filter.Product series range from Oil Filter, Air Filter, Water Filter, Polymer Filter,Candle Filter Element, Stainless Steel Filter to filter Coalescer and Separator.

FAQ

How do I cross-reference my existing OEM part number to a Huahang element?

Send the OEM number plus one physical measurement. A part number alone is not enough to ship against.


* What we match on — Outside diameter, inside diameter, overall height, media grade, micron rating, end-cap and seal layout, bypass setting, collapse rating and flow direction.


* When the number is ambiguous — Superseded numbers, numbers shared across several machine builds, or an element that has clearly been substituted before. In those cases a photo of the housing nameplate and a caliper reading of the old element settle it.


* Why we insist — The most common return is not a wrong size. It is an element that fits the bore but seals on the wrong face.

What collapse or burst pressure can your elements take, and how does flow direction affect it?

Collapse rating comes from the core, not the media — and it only holds in service if two conditions are met.


* Typical ranges — A light return-line element with a perforated core around 10–25 bar; a pressure-line element with a heavy spiral core 100 bar and above; high-collapse designs higher still.


* Condition 1 — flow direction — Return elements are normally outside-in. Run one backwards and the pleat pack goes into tension, folds, and bypasses.


* Condition 2 — bypass setting — The housing’s bypass valve must crack below the element’s collapse rating. Otherwise a cold start or a neglected change-out crushes the element before the valve ever opens.

Can your elements handle fire-resistant fluids such as phosphate ester and EHC systems?

Yes, but the build changes, and this is exactly where a generic replacement fails.


* Seals — Move to FKM or PTFE. NBR swells and softens in phosphate ester.


* Media and bonds — Binder, pleat-seam adhesive and end-cap adhesive all have to resist ester attack; some phenolic resin systems do not.


* Water-based fluids (HFA, HFC) — A different problem again — free water, biological growth, and media that must not delaminate when wet.


* Expect a different ΔP — These fluids run at higher viscosity and lower lubricity than mineral oil, so the same element reads differently on the gauge.

What is the difference between an oil separator element and an oil mist separator?

Same job at different pressures: one works inside a compressor separator tank, the other on a breather or vacuum pump.


* Oil separator element — Removes oil aerosol from compressed air and returns the collected oil to the sump. Rated in mg/m³ carryover, typically a few mg/m³ for a healthy element.


* Oil mist separator — Comparable duty at near-atmospheric pressure, but sized on flow and oil type rather than on pressure.


* Saturation signals, common to both — Carryover climbing, oil consumption rising with no visible leak, ΔP trending up, and an element that comes out dark and varnished instead of evenly coated.

Sintered mesh, sintered powder or pleated stainless steel — how do I choose between them?

Choose on duty, not on price. The three constructions also fail in different ways.


* Sintered mesh : 2 to 5 diffusion-bonded wire layers — High strength, genuinely backflushable, cleanable surface, absolute ratings typically 3–100 µm. Best for catalyst recovery, amine and water service, and anything cleaned in place.


* Sintered powder : A true depth filter: narrow pore distribution, finer ratings (0.5–1 µm with titanium), more dirt capacity per unit area, better resistance to compressive load. The default for polymer melt, high-pressure gas and food or pharmaceutical duty where no fibre release is allowed.


* Pleated stainless : Woven wire cloth in a pleat pack — large area and low ΔP at high flow for coarse duty, and the lowest cost per square metre of area.

How do you ensure the quality and performance of the filter element?

Quality is our lifeline. We insist on:


Strict material selection: Use high-quality raw materials that meet industry standards.


Advanced technology: Use automated or precision-controlled production processes.


Multiple quality inspections: Implement full-process quality inspections from raw material storage to finished product delivery (including size, sealing, filtration efficiency, integrity testing, etc.).


Performance testing: Key products will undergo actual working condition simulation testing.


Compliance with standards: Our production and products comply with [e.g.: ISO 9001].


Customized verification: For customized filter elements, we will confirm key performance indicators with customers and provide test reports (if necessary).

Can metal cartridges be cleaned and reused, and how many cycles should I expect?

Yes . Reusability is usually the whole economic case, and it comes with two hard rules.


* Methods — Reverse-flow backflush at 1.5–2× service rate, ultrasonic cleaning in mild alkaline detergent, caustic or acid CIP, and calcination or steam for carbon and polymer residues.


* Never brush or scrape — That smears the pore structure and drives contamination deeper instead of out.


* Stay inside the chloride limit — 304 will pit at the weld in chloride-bearing water long before the media fails.


* Track the clean ΔP — Once it sits 30–50% above the original baseline, the pore structure is degrading rather than fouling — the cartridge is finished.

What is the difference between nominal and absolute micron ratings on metal media?

The two words are not interchangeable, and the gap between them is where process upsets come from.


- Nominal — Means 90–95% of particles above the stated size are retained, usually with no defined test method behind the claim.


- Absolute — Means 99.9% or better, verified by a defined method — bubble point to ISO 4003, glass-bead challenge, or a recognised particulate challenge.


- Ask which method — Metal ratings are normally derived from bubble-point pore size, so the method is the number.


- Why it matters — A mesh sold as 10 µm nominal will comfortably pass 25 µm particles. Irrelevant for a coarse strainer; fatal upstream of a spin pack or a membrane.

How do I specify a metal cartridge for polymer melt filtration?

Two numbers decide whether the cartridge survives: start-up ΔP, and collapse rating against the screen changer’s maximum.


* Process data — Polymer type (PET, PP, PA6, PE), melt temperature, viscosity at that temperature, throughput in kg/h, allowable pressure build-up.


* Hardware — Screen changer, spin pack or candle housing, with its pressure rating.


* Design on start-up, not steady state — Cold polymer can produce five to ten times the service differential pressure.


* No fibre release — Sintered powder or sintered mesh, not woven cloth, downstream of an extruder.

What do you need for a custom end connection, thread or flange?

Flange standards cause more rework than any other single item on a custom order.


* Dimensions : OD, ID, overall length, thread or flange specification and bolt circle. A drawing, or a photo with a caliper in frame, is enough.


* Connection and seal : M30×1, M36×2, BSP or NPT thread, ANSI or DIN flange, quick connector, bayonet — plus seal type and material.


* Duty : Media and rating, flow, allowable ΔP, temperature, pressure, quantity.

Which filter media should I use for my dust — polyester, anti-static, fiberglass, paper or non-woven?

Match the media to the dust chemistry and to how the collector cleans. Price is the last criterion.


- Polyester needle felt — to about 130 °C — General dry dust. The default choice, and the right starting point for most collectors.


- PTFE-laminated polyester — to about 130 °C — Fine or sticky fume, where dust must not key into the depth of the felt.


- Anti-static polyester, carbon or stainless fibre — to about 130 °C — Combustible dust, and any stream where charge build-up makes the cartridge hold dust it should have released.


- Fiberglass — to about 250 °C — High temperature, and any duty requiring H13 or H14 efficiency.


- Paper or cellulose — Coarse pre-filtration where cost dominates.


- Non-woven synthetic blends — Abrasive or moisture-laden streams.

Does a higher pleat count always mean better performance?

More pleats means more area — until the pleats crowd and cleaning can no longer reach the pleat root.


* What you gain — Lower face velocity, and therefore lower differential pressure at a given flow.


* What you lose — The gaps close under load, the cartridge blinds from the inside out, and the extra area is wasted.


* The metric that matters — Pleat pitch against dust loading: fine sticky dust wants wide spacing, free-flowing granular dust tolerates tight packing.


* Also check — Pleat depth against cage inside diameter. Deep pleats in a small cartridge fold over and create a dead zone that never cleans.

Why do my cartridges fail before their rated life, and how can I extend it?

Four modes account for most premature change-outs, and the fixes sit upstream of the cartridge.


* Media burst or abrasion — High inlet velocity, a missing deflector, or pulse pressure over about 6 bar at the venturi.


* Cage collapse — Differential pressure above rating, or water ingress.


* Adhesive or gasket failure — Temperature past the glue’s limit, or solvent attack.


* Rust-through — Galvanised cages in condensing streams.

What is the difference between a coalescer filter and a separator filter?

They are two distinct technologies often used together to remove liquids from a gas or liquid stream. The key difference is their core function:

* A Coalescer Filter merges tiny, invisible liquid droplets into large, heavy ones.

* A Separator Filter catches and drains those large droplets from the flow.

How They Work:

* Coalescer: The stream passes through a special media (like fine fibers). Microscopic aerosol droplets collide and merge (coalesce) into drops large enough to drain. It solves the problem of suspended mist.

* Separator: The flow then enters a chamber with baffles or vanes. The now-large droplets hit the surfaces, fall out by gravity, and collect in a sump. It provides the final, clean separation.

When do I need fiberglass or stainless instead of polyester, and how do I handle sparks?

Above roughly 130 °C continuous, polyester is out — and the gasket and cage need checking at the same time.

* Next step up — Fiberglass holds to about 260 °C; stainless or ceramic options go further.

* The weak link changes — Often the media survives and the glue line fails first, so the temperature rating must cover the whole assembly.

* Sparks — Welding, grinding, biomass boilers, foundry: a spark arrestor or pre-settling chamber upstream is mandatory. Fiberglass resists heat, not molten metal impingement.

* Condensing streams — Acid dew point corrodes cages faster than it destroys media, and a rusted cage collapses into the fan.
373-5471699
info@huahangfilter.com
+86 16690927259

    X