Home > Products > Metal Cartridge > Sintered Filter > Stainless Steel Sinter Mesh Filter > 304 Stainless Steel Sintered Mesh Filter 40×337

304 Stainless Steel Sintered Mesh Filter 40×337

Type
Sintered Mesh Filter Element
OD
40 mm
Height
337 mm
Filter material
304 Stainless steel mesh
Connection
M20x1.5 Male thread
Filtration rating
Customized
Share:
Products Description
Specification
Features

Products Description

The 304 Stainless Steel Sintered Mesh Filter Cartridge 40×337 is a high-performance cylindrical filtration element engineered for liquid, gas, and vapor filtration in harsh industrial environments. This cartridge delivers exceptional mechanical strength, thermal stability, and corrosion resistance—making it the ideal choice for applications ranging from petrochemical processing and pharmaceutical manufacturing to aerospace and food production.

Manufactured using multi-layer stainless steel woven wire mesh through a specialized lamination pressing and vacuum sintering process, this filter element achieves an ideal balance of filtration precision, structural rigidity, and permeability. 

Specification of Sintered Mesh Filter

Type Sintered Mesh Filter Element
OD 40 mm
Height 337 mm
Filter material 304 Stainless steel
Filtration rate Customized
Connection Male thread
Origin Henan, China
Package Neutral carton package

This is a customized sintered mesh filter. If you have need of this filter, please contact us for the best price.

Features of Stainless Steel Sintered Mesh Filter

Multi‑layer sintered mesh (3–8 layers) provides rigid, high‑strength structure with precise and stable filtration performance.
304 stainless steel offers excellent corrosion and chemical resistance, ideal for acidic, alkaline, and aggressive media.
Integrated External Thread Design : Features a machined external male thread for direct screw-in installation, eliminating the need for separate adapters or fittings in many applications. This design saves space, reduces potential leak points, and ensures a secure mechanical connection.
Superior Durability & Cleanability: Made entirely of corrosion-resistant stainless steel, it is suitable for a wide range of fluids and operating temperatures. The rigid sintered element can be repeatedly cleaned via backwashing, ultrasonics, or chemical methods for extended service life.
Compact Form Factor: The small footprint allows for easy integration into tight spaces within complex assemblies, instrument panels, or mobile equipment without compromising on filtration performance.
Didn't find your industry solution? Consult our technical experts immediately.

Manufacturer & Supplier of Sintered Filter

Huahang Filter is a specialized manufacturer with deep expertise in sintering technology and industrial filtration solutions. Our focus is on engineering reliable, high-performance metal filters. We control the manufacturing process from raw material selection to final quality testing, ensuring each element meets precise specifications for pore size, strength, and durability. Our team supports customers with technical selection and customization to ensure the filter integrates seamlessly and performs reliably in your specific application.

Our manufacturing facility is equipped with advanced vacuum sintering furnaces, precision welding equipment, and dimensional testing instruments, all operated by experienced technicians dedicated to producing filtration components of the highest international standard. We do not simply resell stock filters – we engineer and manufacture each custom element from raw materials to finished product, ensuring full control over quality, lead time, and cost.

 

Why Choose Huahang Filter

  • Advanced Sintering Process Control: We precisely control temperature, atmosphere, and pressure during the sintering process to create a uniform, three-dimensional porous structure with consistent pore size distribution.
  • Superior Stainless Steel Material Integrity: Utilizing certified stainless steel wire mesh, we offer exceptional corrosion resistance, particularly against chlorides and acidic environments.
  • Precision Engineering for Guaranteed Fit: We meticulously manufacture to exact dimensional specifications, ensuring the filter fits perfectly in designated housings. Our commitment to precision extends to end cap bonding, seal interfaces, and overall concentricity.
  • Robust Construction for Demanding Environments: The diffusion-bonded monolithic structure provides exceptional mechanical strength, resistance to thermal cycling, and the ability to withstand high differential pressures without collapse or deformation.
  • Comprehensive Customization Capability: Beyond standard sizes, we specialize in custom sintered components. Our engineering team can develop elements with specific micron ratings, dimensions, connection types, and material grades to meet unique application requirements.

Applications

The 304 stainless steel sintered mesh filter element is widely used across multiple demanding industries:

  • Petrochemical & Chemical Processing: High-temperature corrosive liquid filtration, catalyst recovery, chemical intermediate filtration, polymer filtration

  • Hydraulic & Lubrication Systems: Precision filtration of hydraulic oil and lubricating oil in industrial machinery

  • Pharmaceutical & Biotechnology: Sterile filtration of process gases, fermentation air, and high-purity liquid streams

  • Power Generation: High-temperature flue gas filtration and purification, turbine protection

  • Oil & Gas: Natural gas pipeline systems, refinery process filtration

  • Water Treatment: Industrial cooling water systems, RO pretreatment

  • Compressed Air & Pneumatic Systems: Particulate removal from compressed air lines, gas analyzers, sensor protection

FAQs of The Sintered Filter

Q1: Is this filter element suitable for high-pressure applications?
A1: Yes. The sintered metal construction provides high mechanical strength and pressure resistance. The element can withstand operating pressures up to 35 MPa (depending on configuration), making it suitable for high-pressure hydraulic and process applications.

Q2: What is the best method to clean this filter, and how do I know it’s clean?
A2: For most applications, ultrasonic cleaning followed by a clean water or solvent rinse is highly effective for removing embedded particles. Backflushing with clean compressed air or liquid is also common. A well-cleaned filter will restore its initial, clean pressure drop when tested with a clean fluid. A significant, irreversible pressure drop indicates the end of its usable life.

Q3: Can you provide customized sintered filter?
A3: Yes. We can not only provide the standard size, but also the customized filters. We routinely modify end cap designs (e.g., add NPT threads, O-ring grooves, or flanges) and can adjust the overall length or even the filtration rating to meet your specific system integration requirements and performance goals.

Q4: How does the number of sintered layers affect filtration performance, pressure drop, and cleanability?
A: More layers increase:

Mechanical strength – Additional reinforcing layers improve collapse pressure .

Dirt‑holding capacity – Depth loading increases as more layers are added, extending service life before cleaning.

Pressure drop – Each additional layer adds resistance; typically 5‑10% ΔP increase per layer.

Fewer layers offer lower ΔP but less strength and dirt‑holding. Standard recommendation for 30×100: 5‑layer (protective + control + dispersion + 2 reinforcing) balances all factors. Use 7‑layer only for high‑pressure or high‑abrasion applications; use 3‑layer for low‑pressure, high‑flow, clean service.

Q5: What is the difference between 304 and 316L stainless steel for filter elements?

A: 304 stainless steel offers good corrosion resistance and is cost-effective for most general industrial applications.

316L stainless steel contains 2-3% molybdenum, providing superior corrosion resistance to chlorides, acids, and alkalis, making it the preferred choice for marine, offshore, and highly corrosive chemical environments.

Choose 304 for general applications and 316L for demanding corrosive environments.

Related Products

Related Cases

Xinxiang City Huahang Filter Co., Ltd is professional in the production of Hydraulic Filter, Air Filter and Pipe Filter.Product series range from Oil Filter, Air Filter, Water Filter, Polymer Filter,Candle Filter Element, Stainless Steel Filter to filter Coalescer and Separator.

FAQ

How do I cross-reference my existing OEM part number to a Huahang element?

Send the OEM number plus one physical measurement. A part number alone is not enough to ship against.


* What we match on — Outside diameter, inside diameter, overall height, media grade, micron rating, end-cap and seal layout, bypass setting, collapse rating and flow direction.


* When the number is ambiguous — Superseded numbers, numbers shared across several machine builds, or an element that has clearly been substituted before. In those cases a photo of the housing nameplate and a caliper reading of the old element settle it.


* Why we insist — The most common return is not a wrong size. It is an element that fits the bore but seals on the wrong face.

What collapse or burst pressure can your elements take, and how does flow direction affect it?

Collapse rating comes from the core, not the media — and it only holds in service if two conditions are met.


* Typical ranges — A light return-line element with a perforated core around 10–25 bar; a pressure-line element with a heavy spiral core 100 bar and above; high-collapse designs higher still.


* Condition 1 — flow direction — Return elements are normally outside-in. Run one backwards and the pleat pack goes into tension, folds, and bypasses.


* Condition 2 — bypass setting — The housing’s bypass valve must crack below the element’s collapse rating. Otherwise a cold start or a neglected change-out crushes the element before the valve ever opens.

Can your elements handle fire-resistant fluids such as phosphate ester and EHC systems?

Yes, but the build changes, and this is exactly where a generic replacement fails.


* Seals — Move to FKM or PTFE. NBR swells and softens in phosphate ester.


* Media and bonds — Binder, pleat-seam adhesive and end-cap adhesive all have to resist ester attack; some phenolic resin systems do not.


* Water-based fluids (HFA, HFC) — A different problem again — free water, biological growth, and media that must not delaminate when wet.


* Expect a different ΔP — These fluids run at higher viscosity and lower lubricity than mineral oil, so the same element reads differently on the gauge.

What is the difference between an oil separator element and an oil mist separator?

Same job at different pressures: one works inside a compressor separator tank, the other on a breather or vacuum pump.


* Oil separator element — Removes oil aerosol from compressed air and returns the collected oil to the sump. Rated in mg/m³ carryover, typically a few mg/m³ for a healthy element.


* Oil mist separator — Comparable duty at near-atmospheric pressure, but sized on flow and oil type rather than on pressure.


* Saturation signals, common to both — Carryover climbing, oil consumption rising with no visible leak, ΔP trending up, and an element that comes out dark and varnished instead of evenly coated.

Sintered mesh, sintered powder or pleated stainless steel — how do I choose between them?

Choose on duty, not on price. The three constructions also fail in different ways.


* Sintered mesh : 2 to 5 diffusion-bonded wire layers — High strength, genuinely backflushable, cleanable surface, absolute ratings typically 3–100 µm. Best for catalyst recovery, amine and water service, and anything cleaned in place.


* Sintered powder : A true depth filter: narrow pore distribution, finer ratings (0.5–1 µm with titanium), more dirt capacity per unit area, better resistance to compressive load. The default for polymer melt, high-pressure gas and food or pharmaceutical duty where no fibre release is allowed.


* Pleated stainless : Woven wire cloth in a pleat pack — large area and low ΔP at high flow for coarse duty, and the lowest cost per square metre of area.

How do you ensure the quality and performance of the filter element?

Quality is our lifeline. We insist on:


Strict material selection: Use high-quality raw materials that meet industry standards.


Advanced technology: Use automated or precision-controlled production processes.


Multiple quality inspections: Implement full-process quality inspections from raw material storage to finished product delivery (including size, sealing, filtration efficiency, integrity testing, etc.).


Performance testing: Key products will undergo actual working condition simulation testing.


Compliance with standards: Our production and products comply with [e.g.: ISO 9001].


Customized verification: For customized filter elements, we will confirm key performance indicators with customers and provide test reports (if necessary).

Can metal cartridges be cleaned and reused, and how many cycles should I expect?

Yes . Reusability is usually the whole economic case, and it comes with two hard rules.


* Methods — Reverse-flow backflush at 1.5–2× service rate, ultrasonic cleaning in mild alkaline detergent, caustic or acid CIP, and calcination or steam for carbon and polymer residues.


* Never brush or scrape — That smears the pore structure and drives contamination deeper instead of out.


* Stay inside the chloride limit — 304 will pit at the weld in chloride-bearing water long before the media fails.


* Track the clean ΔP — Once it sits 30–50% above the original baseline, the pore structure is degrading rather than fouling — the cartridge is finished.

What is the difference between nominal and absolute micron ratings on metal media?

The two words are not interchangeable, and the gap between them is where process upsets come from.


- Nominal — Means 90–95% of particles above the stated size are retained, usually with no defined test method behind the claim.


- Absolute — Means 99.9% or better, verified by a defined method — bubble point to ISO 4003, glass-bead challenge, or a recognised particulate challenge.


- Ask which method — Metal ratings are normally derived from bubble-point pore size, so the method is the number.


- Why it matters — A mesh sold as 10 µm nominal will comfortably pass 25 µm particles. Irrelevant for a coarse strainer; fatal upstream of a spin pack or a membrane.

How do I specify a metal cartridge for polymer melt filtration?

Two numbers decide whether the cartridge survives: start-up ΔP, and collapse rating against the screen changer’s maximum.


* Process data — Polymer type (PET, PP, PA6, PE), melt temperature, viscosity at that temperature, throughput in kg/h, allowable pressure build-up.


* Hardware — Screen changer, spin pack or candle housing, with its pressure rating.


* Design on start-up, not steady state — Cold polymer can produce five to ten times the service differential pressure.


* No fibre release — Sintered powder or sintered mesh, not woven cloth, downstream of an extruder.

What do you need for a custom end connection, thread or flange?

Flange standards cause more rework than any other single item on a custom order.


* Dimensions : OD, ID, overall length, thread or flange specification and bolt circle. A drawing, or a photo with a caliper in frame, is enough.


* Connection and seal : M30×1, M36×2, BSP or NPT thread, ANSI or DIN flange, quick connector, bayonet — plus seal type and material.


* Duty : Media and rating, flow, allowable ΔP, temperature, pressure, quantity.

Which filter media should I use for my dust — polyester, anti-static, fiberglass, paper or non-woven?

Match the media to the dust chemistry and to how the collector cleans. Price is the last criterion.


- Polyester needle felt — to about 130 °C — General dry dust. The default choice, and the right starting point for most collectors.


- PTFE-laminated polyester — to about 130 °C — Fine or sticky fume, where dust must not key into the depth of the felt.


- Anti-static polyester, carbon or stainless fibre — to about 130 °C — Combustible dust, and any stream where charge build-up makes the cartridge hold dust it should have released.


- Fiberglass — to about 250 °C — High temperature, and any duty requiring H13 or H14 efficiency.


- Paper or cellulose — Coarse pre-filtration where cost dominates.


- Non-woven synthetic blends — Abrasive or moisture-laden streams.

Does a higher pleat count always mean better performance?

More pleats means more area — until the pleats crowd and cleaning can no longer reach the pleat root.


* What you gain — Lower face velocity, and therefore lower differential pressure at a given flow.


* What you lose — The gaps close under load, the cartridge blinds from the inside out, and the extra area is wasted.


* The metric that matters — Pleat pitch against dust loading: fine sticky dust wants wide spacing, free-flowing granular dust tolerates tight packing.


* Also check — Pleat depth against cage inside diameter. Deep pleats in a small cartridge fold over and create a dead zone that never cleans.

Why do my cartridges fail before their rated life, and how can I extend it?

Four modes account for most premature change-outs, and the fixes sit upstream of the cartridge.


* Media burst or abrasion — High inlet velocity, a missing deflector, or pulse pressure over about 6 bar at the venturi.


* Cage collapse — Differential pressure above rating, or water ingress.


* Adhesive or gasket failure — Temperature past the glue’s limit, or solvent attack.


* Rust-through — Galvanised cages in condensing streams.

What is the difference between a coalescer filter and a separator filter?

They are two distinct technologies often used together to remove liquids from a gas or liquid stream. The key difference is their core function:

* A Coalescer Filter merges tiny, invisible liquid droplets into large, heavy ones.

* A Separator Filter catches and drains those large droplets from the flow.

How They Work:

* Coalescer: The stream passes through a special media (like fine fibers). Microscopic aerosol droplets collide and merge (coalesce) into drops large enough to drain. It solves the problem of suspended mist.

* Separator: The flow then enters a chamber with baffles or vanes. The now-large droplets hit the surfaces, fall out by gravity, and collect in a sump. It provides the final, clean separation.

When do I need fiberglass or stainless instead of polyester, and how do I handle sparks?

Above roughly 130 °C continuous, polyester is out — and the gasket and cage need checking at the same time.

* Next step up — Fiberglass holds to about 260 °C; stainless or ceramic options go further.

* The weak link changes — Often the media survives and the glue line fails first, so the temperature rating must cover the whole assembly.

* Sparks — Welding, grinding, biomass boilers, foundry: a spark arrestor or pre-settling chamber upstream is mandatory. Fiberglass resists heat, not molten metal impingement.

* Condensing streams — Acid dew point corrodes cages faster than it destroys media, and a rusted cage collapses into the fan.
373-5471699
info@huahangfilter.com
+86 16690927259

    X