Home > Products > Liquid Solution > Coalescence and Separation Filter > Separator Filter > Oil Mist Separator Filter Element LE9005

Oil Mist Separator Filter Element LE9005

Type
Oil Mist Separator Filter Element
End caps
Carbon steel
Part number
LE9005
Dimension
Standard/Customized
Filter material
Composite filter media
Working temperature
-10 ℃~+110 ℃
Origin
Henan,China
Share:
Products Description
Specification
Features

Products Description

The LE9005 oil mist separator filter element is the core consumable component within oil mist separators installed on oil‑lubricated vacuum pumps, screw compressors, reciprocating compressors, and other compressed air equipment where oil carryover must be eliminated to protect downstream instruments, processes, and the environment.

The LE9005 oil mist separator filter element is installed directly into the exhaust housing or separator tank of the compressor or vacuum pump assembly. As oil‑laden compressed air passes through the specialized coalescing media, micron‑sized and sub‑micron oil aerosol particles are intercepted, collected, and coalesced into larger droplets that drain back into the oil reservoir for recirculation.

Specification

Type Oil Separator Filter Element
Part number LE9005
Dimension Standard/Customized
Filter material Composite filter media
End caps Carbon steel
Working temperature -20~+100℃
Origin Henan, China
Package Neutral carton package

If you want to know more about the separator filter, please contact us to get the quotation.

Features

Multi-Layer Coalescing Structure. Outside layer: pre-filter / foam wrap catches large oil droplets. Middle layers: high-density glass fiber microfibers provide the actual coalescing action. Inner drainage layer: allows coalesced oil to flow downward without re-entraining into the air stream. This layered design is what makes the element work consistently.
Optimized for Vacuum Pumps & Compressors: Specifically engineered for oil‑lubricated rotary vane pumps and screw compressors. Installs directly into the exhaust housing for effective oil mist elimination.
Combining centrifugal separation, mechanical interception, and fiber adsorption technologies, it removes oil mist through velocity differences and oil droplet aggregation.
Cost‑Effective OEM Alternative: Factory‑direct pricing without quality compromise. Delivers equivalent filtration performance, dimensional fit, and durability at significant savings.
Didn't find your industry solution? Consult our technical experts immediately.

Primary Application Areas

  • Vacuum Pump Exhaust Filtration – Installs directly into exhaust boxes of oil‑lubricated rotary vane pumps. Removes visible oil mist and smoke from SMT pick‑and‑place, medical vacuum, packaging, and woodworking applications.
  • Screw Compressor Air‑Oil Separation – Serves as a high‑efficiency coalescing element in oil‑flooded screw compressors. Removes sub‑micron oil droplets, allowing separated oil to drain back for recirculation.
  • Reciprocating Compressor Discharge Cleaning – Captures oil aerosols that migrate past piston rings in piston‑type compressors. Protects downstream receivers, dryers, and piping from oil accumulation.
  • Instrument Air Systems – Delivers ISO 8573‑1 Class 2 oil‑free air for pneumatic instrumentation. Used in chemical processing, pharmaceutical manufacturing, food & beverage, and electronics assembly.
  • CNC Machining & Metalworking – Cleans oil mist and coolant aerosols from vacuum‑assisted coolant recovery systems. Helps maintain clean shop air and protects downstream equipment.
  • Automotive & General Manufacturing – Cleans compressed air for pneumatic tools, blow‑off operations, paint spraying, and assembly equipment. Reduces tool failures and improves finish quality.

Manufacturer of Separator Filters

With over two decades of continuous operation in the filtration manufacturing industry, Huahang Filter has developed deep technical expertise across oil mist separation, hydraulic filtration, compressed air filtration, and vacuum system filtration. Our company‘s comprehensive filtration product portfolio includes oil mist eliminators for vacuum pumps and compressors, hydraulic oil filter elements, air intake filters, dust collector filter cartridges, stainless steel filter elements, coalescer cartridges, and replacement elements.

Huahang‘s manufacturing facility is equipped with advanced cutting, pleating, assembly, welding, and testing equipment, all operated by experienced technicians dedicated to producing filtration components of the highest international standard. The company‘s engineering team can verify dimensional and functional interchangeability for replacement filters across a wide range of equipment manufacturers.

◊Why Choose Huahang Filter

  • Direct OEM Replacement Without the Premium Price: Our LE9005 oil mist separator matches original dimensions and media performance.
  • ISO 9001:2015 Certified Quality: Every filter element is manufactured under a certified quality management system. Raw material inspection, in‑process checks, and final testing ensure consistent, reliable performance.
  • 20+ Years of Filtration Manufacturing Experience: Huahang Filter has specialized in coalescing filters, hydraulic filters, and vacuum pump elements for more than 20 years. Our engineers understand oil mist separation science and vacuum pump protection.
  • Customization Available for Special Applications: Need stainless steel end caps for food/pharma environments? FKM seals for high temperatures? Alternative media? We offer full customization with short lead times.
  • Technical Support You Can Trust: Our application engineers help verify compatibility, interpret pressure drop readings, and recommend replacement schedules.

FAQs of Separator Filter

Q: What are the signs that my LE9005 oil mist separator needs replacement?

A: Watch for these indicators:

  • Visible oil mist or smoke still coming from the exhaust after the separator—indicates the filter is saturated or damaged

  • Increased oil consumption —more frequent oil top‑ups suggest oil is passing through the filter rather than being returned to the system

  • Elevated back pressure —if the vacuum pump or compressor seems to be working harder or running hotter than usual

  • Pressure drop alarm —if your equipment has a differential pressure indicator that activates

  • Scheduled service interval reached —typically every 6‑12 months under normal conditions

Q: What happens if I don’t replace it on time?
A: Pressure drop increases, wasting energy. Oil carryover increases, contaminating downstream equipment. Eventually, the element can collapse or rupture, dumping oil directly into the compressed air line. That’s expensive to clean up.

Q: Can I clean and reuse this oil separator?
A: No. Oil separator elements are not washable or reusable. The coalescing media is permanently bonded and loses efficiency after oil saturation. Replace with a new element.

Q: Do you offer a separator with a built-in pressure drop indicator?
A: The pressure drop indicator is usually in the compressor housing, not on the element itself. However, Huahang can integrate a sensing port if your design requires it. Discuss with the sales team.

Related Products

Related Cases

Xinxiang City Huahang Filter Co., Ltd is professional in the production of Hydraulic Filter, Air Filter and Pipe Filter.Product series range from Oil Filter, Air Filter, Water Filter, Polymer Filter,Candle Filter Element, Stainless Steel Filter to filter Coalescer and Separator.

FAQ

How do I cross-reference my existing OEM part number to a Huahang element?

Send the OEM number plus one physical measurement. A part number alone is not enough to ship against.


* What we match on — Outside diameter, inside diameter, overall height, media grade, micron rating, end-cap and seal layout, bypass setting, collapse rating and flow direction.


* When the number is ambiguous — Superseded numbers, numbers shared across several machine builds, or an element that has clearly been substituted before. In those cases a photo of the housing nameplate and a caliper reading of the old element settle it.


* Why we insist — The most common return is not a wrong size. It is an element that fits the bore but seals on the wrong face.

What collapse or burst pressure can your elements take, and how does flow direction affect it?

Collapse rating comes from the core, not the media — and it only holds in service if two conditions are met.


* Typical ranges — A light return-line element with a perforated core around 10–25 bar; a pressure-line element with a heavy spiral core 100 bar and above; high-collapse designs higher still.


* Condition 1 — flow direction — Return elements are normally outside-in. Run one backwards and the pleat pack goes into tension, folds, and bypasses.


* Condition 2 — bypass setting — The housing’s bypass valve must crack below the element’s collapse rating. Otherwise a cold start or a neglected change-out crushes the element before the valve ever opens.

Can your elements handle fire-resistant fluids such as phosphate ester and EHC systems?

Yes, but the build changes, and this is exactly where a generic replacement fails.


* Seals — Move to FKM or PTFE. NBR swells and softens in phosphate ester.


* Media and bonds — Binder, pleat-seam adhesive and end-cap adhesive all have to resist ester attack; some phenolic resin systems do not.


* Water-based fluids (HFA, HFC) — A different problem again — free water, biological growth, and media that must not delaminate when wet.


* Expect a different ΔP — These fluids run at higher viscosity and lower lubricity than mineral oil, so the same element reads differently on the gauge.

What is the difference between an oil separator element and an oil mist separator?

Same job at different pressures: one works inside a compressor separator tank, the other on a breather or vacuum pump.


* Oil separator element — Removes oil aerosol from compressed air and returns the collected oil to the sump. Rated in mg/m³ carryover, typically a few mg/m³ for a healthy element.


* Oil mist separator — Comparable duty at near-atmospheric pressure, but sized on flow and oil type rather than on pressure.


* Saturation signals, common to both — Carryover climbing, oil consumption rising with no visible leak, ΔP trending up, and an element that comes out dark and varnished instead of evenly coated.

Sintered mesh, sintered powder or pleated stainless steel — how do I choose between them?

Choose on duty, not on price. The three constructions also fail in different ways.


* Sintered mesh : 2 to 5 diffusion-bonded wire layers — High strength, genuinely backflushable, cleanable surface, absolute ratings typically 3–100 µm. Best for catalyst recovery, amine and water service, and anything cleaned in place.


* Sintered powder : A true depth filter: narrow pore distribution, finer ratings (0.5–1 µm with titanium), more dirt capacity per unit area, better resistance to compressive load. The default for polymer melt, high-pressure gas and food or pharmaceutical duty where no fibre release is allowed.


* Pleated stainless : Woven wire cloth in a pleat pack — large area and low ΔP at high flow for coarse duty, and the lowest cost per square metre of area.

How do you ensure the quality and performance of the filter element?

Quality is our lifeline. We insist on:


Strict material selection: Use high-quality raw materials that meet industry standards.


Advanced technology: Use automated or precision-controlled production processes.


Multiple quality inspections: Implement full-process quality inspections from raw material storage to finished product delivery (including size, sealing, filtration efficiency, integrity testing, etc.).


Performance testing: Key products will undergo actual working condition simulation testing.


Compliance with standards: Our production and products comply with [e.g.: ISO 9001].


Customized verification: For customized filter elements, we will confirm key performance indicators with customers and provide test reports (if necessary).

Can metal cartridges be cleaned and reused, and how many cycles should I expect?

Yes . Reusability is usually the whole economic case, and it comes with two hard rules.


* Methods — Reverse-flow backflush at 1.5–2× service rate, ultrasonic cleaning in mild alkaline detergent, caustic or acid CIP, and calcination or steam for carbon and polymer residues.


* Never brush or scrape — That smears the pore structure and drives contamination deeper instead of out.


* Stay inside the chloride limit — 304 will pit at the weld in chloride-bearing water long before the media fails.


* Track the clean ΔP — Once it sits 30–50% above the original baseline, the pore structure is degrading rather than fouling — the cartridge is finished.

What is the difference between nominal and absolute micron ratings on metal media?

The two words are not interchangeable, and the gap between them is where process upsets come from.


- Nominal — Means 90–95% of particles above the stated size are retained, usually with no defined test method behind the claim.


- Absolute — Means 99.9% or better, verified by a defined method — bubble point to ISO 4003, glass-bead challenge, or a recognised particulate challenge.


- Ask which method — Metal ratings are normally derived from bubble-point pore size, so the method is the number.


- Why it matters — A mesh sold as 10 µm nominal will comfortably pass 25 µm particles. Irrelevant for a coarse strainer; fatal upstream of a spin pack or a membrane.

How do I specify a metal cartridge for polymer melt filtration?

Two numbers decide whether the cartridge survives: start-up ΔP, and collapse rating against the screen changer’s maximum.


* Process data — Polymer type (PET, PP, PA6, PE), melt temperature, viscosity at that temperature, throughput in kg/h, allowable pressure build-up.


* Hardware — Screen changer, spin pack or candle housing, with its pressure rating.


* Design on start-up, not steady state — Cold polymer can produce five to ten times the service differential pressure.


* No fibre release — Sintered powder or sintered mesh, not woven cloth, downstream of an extruder.

What do you need for a custom end connection, thread or flange?

Flange standards cause more rework than any other single item on a custom order.


* Dimensions : OD, ID, overall length, thread or flange specification and bolt circle. A drawing, or a photo with a caliper in frame, is enough.


* Connection and seal : M30×1, M36×2, BSP or NPT thread, ANSI or DIN flange, quick connector, bayonet — plus seal type and material.


* Duty : Media and rating, flow, allowable ΔP, temperature, pressure, quantity.

Which filter media should I use for my dust — polyester, anti-static, fiberglass, paper or non-woven?

Match the media to the dust chemistry and to how the collector cleans. Price is the last criterion.


- Polyester needle felt — to about 130 °C — General dry dust. The default choice, and the right starting point for most collectors.


- PTFE-laminated polyester — to about 130 °C — Fine or sticky fume, where dust must not key into the depth of the felt.


- Anti-static polyester, carbon or stainless fibre — to about 130 °C — Combustible dust, and any stream where charge build-up makes the cartridge hold dust it should have released.


- Fiberglass — to about 250 °C — High temperature, and any duty requiring H13 or H14 efficiency.


- Paper or cellulose — Coarse pre-filtration where cost dominates.


- Non-woven synthetic blends — Abrasive or moisture-laden streams.

Does a higher pleat count always mean better performance?

More pleats means more area — until the pleats crowd and cleaning can no longer reach the pleat root.


* What you gain — Lower face velocity, and therefore lower differential pressure at a given flow.


* What you lose — The gaps close under load, the cartridge blinds from the inside out, and the extra area is wasted.


* The metric that matters — Pleat pitch against dust loading: fine sticky dust wants wide spacing, free-flowing granular dust tolerates tight packing.


* Also check — Pleat depth against cage inside diameter. Deep pleats in a small cartridge fold over and create a dead zone that never cleans.

Why do my cartridges fail before their rated life, and how can I extend it?

Four modes account for most premature change-outs, and the fixes sit upstream of the cartridge.


* Media burst or abrasion — High inlet velocity, a missing deflector, or pulse pressure over about 6 bar at the venturi.


* Cage collapse — Differential pressure above rating, or water ingress.


* Adhesive or gasket failure — Temperature past the glue’s limit, or solvent attack.


* Rust-through — Galvanised cages in condensing streams.

What is the difference between a coalescer filter and a separator filter?

They are two distinct technologies often used together to remove liquids from a gas or liquid stream. The key difference is their core function:

* A Coalescer Filter merges tiny, invisible liquid droplets into large, heavy ones.

* A Separator Filter catches and drains those large droplets from the flow.

How They Work:

* Coalescer: The stream passes through a special media (like fine fibers). Microscopic aerosol droplets collide and merge (coalesce) into drops large enough to drain. It solves the problem of suspended mist.

* Separator: The flow then enters a chamber with baffles or vanes. The now-large droplets hit the surfaces, fall out by gravity, and collect in a sump. It provides the final, clean separation.

When do I need fiberglass or stainless instead of polyester, and how do I handle sparks?

Above roughly 130 °C continuous, polyester is out — and the gasket and cage need checking at the same time.

* Next step up — Fiberglass holds to about 260 °C; stainless or ceramic options go further.

* The weak link changes — Often the media survives and the glue line fails first, so the temperature rating must cover the whole assembly.

* Sparks — Welding, grinding, biomass boilers, foundry: a spark arrestor or pre-settling chamber upstream is mandatory. Fiberglass resists heat, not molten metal impingement.

* Condensing streams — Acid dew point corrodes cages faster than it destroys media, and a rusted cage collapses into the fan.
373-5471699
info@huahangfilter.com
+86 16690927259

    X