Home > Products > Liquid Solution > Alternative Oil Filter Element > Other Brand > ZNGL02010201 Replace Hydraulic Oil Filter

ZNGL02010201 Replace Hydraulic Oil Filter

Part number
ZNGL02010201
Filter material
Fiberglass
Filtration rate
1~50μm
End caps
Nylon
Working temperature
-20~+110℃
Origin
Henan,China
Share:
Products Description
Specification
Features

Products Description

ZNGL02010201 replacement hydraulic oil filter is designed as an exact, direct-fit substitute for the original filter, guaranteeing seamless integration and reliable performance. It provides robust contaminant control for hydraulic systems, effectively safeguarding critical components such as pumps, valves, and actuators from abrasive wear, thereby extending equipment service life and minimizing unplanned downtime.

Utilizing high-efficiency depth filtration media, this replacement element captures and retains fine wear metals, dirt, and sludge. By maintaining superior oil cleanliness, it supports consistent system pressure, reduces component friction, and contributes to lower long-term maintenance costs across industrial and mobile hydraulic applications.

Specification

This is the specification of the standard ZNGL02010201 replace oil filter element. If you need other part number, please contact us.

Type Replace Oil Filter Element
Part number ZNGL02010201
End caps Nylon
Filter material Fiberglass
Filtration rate 1~50μm
Working temperature -20~+110℃
Origin Henan, China
Package Neutral carton package

 

Features

High-Efficiency Depth Filtration: Features advanced pleated media designed for excellent particle capture and retention, effectively maintaining required fluid cleanliness levels (e.g., target ISO codes).
Durable & Reliable Construction: Built with a robust inner support core and securely bonded end caps to withstand pressure differentials and prevent media migration, ensuring stable performance throughout its service life.
Essential System Protection: Safeguards sensitive hydraulic components from abrasive wear, helping to maintain operational efficiency, reduce repair frequency, and maximize equipment uptime.
Cost-Effective Maintenance Solution: Provides a high-value, reliable alternative for preventive maintenance programs, contributing to a lower total cost of ownership.
Didn't find your industry solution? Consult our technical experts immediately.

Related part number

Below is a list of some common alternative models. This is only a partial list; please send us your other requirements.

0030D003BN/HC 0030D005BH/HC 0030D005BN3HC 0030D025W/HC 0060D003BN3HC 0060D005BH3HC
0060D010BN3HC 0060D020W/HC 0110D005BH/HC 0110D010BN/HC 0110D003BH/HC 0110D010BN3HC
0240D003BN/HC 0240D005BN3HC 0240D010BH3HC 0240D020W/HC 0140D003BN/HC 0140D005BN3HC
0140D010BH3HC 0140D020W/HC 0160D0003BN/HC 0160D0005BN3HC 0160D0010BH3HC 0160D0020W/HC
0280D003BN/HC 0280D005BN3HC 0280D010BH3HC 0280D020W/HC 0330D003BN/HC 0330D005BN3HC
0330D010BH3HC 0330D020W/HC 0480D003BN/HC 0480D005BN3HC 0480D010BH3HC 0480D020W/HC
0500D003BN/HC 0500D005BN3HC 0500D010BH3HC 0500D020W/HC 0660D003BN/HC 0660D005BN3HC
0660D010BH3HC 0660D020W/HC 0990D003BN/HC 0990D005BN3HC 0990D010BH3HC 0990D020W/HC
0030R003BN3HC 0030R005BN/HC 0030R010P 0030R025W 0060R003BN3HC 0060R005BN/HC
0060R010P 0060R025W 0110R003BH3HC 0110R005BN/HC 0110R010P 0110R025W
0160R003BN3HC 0160R005BN/HC 0160R010P 0160R025W 0240R003BN3HC 0240R005BN/HC

Manufacturer of Replace Oil Filter Element

Founded with a mission to deliver uncompromising reliability in fluid management, Huahang Filter has established itself as a leading manufacturer and solution provider in the industrial filtration sector. With years of dedicated expertise, we specialize in the design, engineering, and production of high-performance filtration products, most notably our advanced sintered mesh filters and comprehensive range of replacement filter elements.

Product Profile of Huahang Filter

Huahang serves a global clientele across vital sectors. Our portfolio spans:

  • Sintered Filters: For high-temperature gas filtration, polymer melt filtration, and critical fluid protection.
  • Replacement Filter Elements: Precision equivalents for major OEM brands (including Parker, Hydac, Pal and others), ensuring system compatibility without compromise.
  • Oil Filter Cartridges: A full spectrum of depth, particulate, and coalescing filters for lubrication, hydraulic, and fuel systems.

In addition to standard models, Huahang filter can also provide customized service according to customer needs, including dimensions, materials, end caps, and filter housings. Please contact us for specific information.

FAQ

Q1: Is this an original OEM (brand) filter?
A1: This is a high-performance direct replacement element manufactured by Huahang Filter. It is engineered to provide equivalent fit, filtration efficiency, and performance to the original ZNGL02010201 OEM part.

Q2: How can I confirm this filter will fit my specific housing?
A2: This product is a direct cross-reference for part number ZNGL02010201. The surest method is to verify that this exact number is listed in your equipment’s service manual or is printed on the filter currently installed in your system.

Q3: What is the micron rating or filtration efficiency of this element?
A3: This replacement element is manufactured to meet or exceed the filtration performance standards of the original part. For specific technical data, including micron rating and Beta ratio (βx), please consult the manufacturer’s technical datasheet or contact your supplier.

Q4: Is this filter compatible with synthetic and bio-based hydraulic fluids?
A4: The standard construction is compatible with a wide range of mineral-based and common synthetic hydraulic oils. For use with water-glycol, phosphate ester, or other specialty fluids, please verify chemical compatibility with the filter media and seals prior to use.

Q5: When should this hydraulic filter be replaced?
A5: Replacement intervals depend on your system’s operating conditions, fluid type, and contamination levels. Always prioritize the service interval specified in your equipment manufacturer’s manual. The most accurate method is to monitor the pressure differential across the filter housing and replace the element when it reaches the maximum recommended delta-P.

Related Products

Related Cases

Xinxiang City Huahang Filter Co., Ltd is professional in the production of Hydraulic Filter, Air Filter and Pipe Filter.Product series range from Oil Filter, Air Filter, Water Filter, Polymer Filter,Candle Filter Element, Stainless Steel Filter to filter Coalescer and Separator.

FAQ

How do I cross-reference my existing OEM part number to a Huahang element?

Send the OEM number plus one physical measurement. A part number alone is not enough to ship against.


* What we match on — Outside diameter, inside diameter, overall height, media grade, micron rating, end-cap and seal layout, bypass setting, collapse rating and flow direction.


* When the number is ambiguous — Superseded numbers, numbers shared across several machine builds, or an element that has clearly been substituted before. In those cases a photo of the housing nameplate and a caliper reading of the old element settle it.


* Why we insist — The most common return is not a wrong size. It is an element that fits the bore but seals on the wrong face.

What collapse or burst pressure can your elements take, and how does flow direction affect it?

Collapse rating comes from the core, not the media — and it only holds in service if two conditions are met.


* Typical ranges — A light return-line element with a perforated core around 10–25 bar; a pressure-line element with a heavy spiral core 100 bar and above; high-collapse designs higher still.


* Condition 1 — flow direction — Return elements are normally outside-in. Run one backwards and the pleat pack goes into tension, folds, and bypasses.


* Condition 2 — bypass setting — The housing’s bypass valve must crack below the element’s collapse rating. Otherwise a cold start or a neglected change-out crushes the element before the valve ever opens.

Can your elements handle fire-resistant fluids such as phosphate ester and EHC systems?

Yes, but the build changes, and this is exactly where a generic replacement fails.


* Seals — Move to FKM or PTFE. NBR swells and softens in phosphate ester.


* Media and bonds — Binder, pleat-seam adhesive and end-cap adhesive all have to resist ester attack; some phenolic resin systems do not.


* Water-based fluids (HFA, HFC) — A different problem again — free water, biological growth, and media that must not delaminate when wet.


* Expect a different ΔP — These fluids run at higher viscosity and lower lubricity than mineral oil, so the same element reads differently on the gauge.

What is the difference between an oil separator element and an oil mist separator?

Same job at different pressures: one works inside a compressor separator tank, the other on a breather or vacuum pump.


* Oil separator element — Removes oil aerosol from compressed air and returns the collected oil to the sump. Rated in mg/m³ carryover, typically a few mg/m³ for a healthy element.


* Oil mist separator — Comparable duty at near-atmospheric pressure, but sized on flow and oil type rather than on pressure.


* Saturation signals, common to both — Carryover climbing, oil consumption rising with no visible leak, ΔP trending up, and an element that comes out dark and varnished instead of evenly coated.

Sintered mesh, sintered powder or pleated stainless steel — how do I choose between them?

Choose on duty, not on price. The three constructions also fail in different ways.


* Sintered mesh : 2 to 5 diffusion-bonded wire layers — High strength, genuinely backflushable, cleanable surface, absolute ratings typically 3–100 µm. Best for catalyst recovery, amine and water service, and anything cleaned in place.


* Sintered powder : A true depth filter: narrow pore distribution, finer ratings (0.5–1 µm with titanium), more dirt capacity per unit area, better resistance to compressive load. The default for polymer melt, high-pressure gas and food or pharmaceutical duty where no fibre release is allowed.


* Pleated stainless : Woven wire cloth in a pleat pack — large area and low ΔP at high flow for coarse duty, and the lowest cost per square metre of area.

How do you ensure the quality and performance of the filter element?

Quality is our lifeline. We insist on:


Strict material selection: Use high-quality raw materials that meet industry standards.


Advanced technology: Use automated or precision-controlled production processes.


Multiple quality inspections: Implement full-process quality inspections from raw material storage to finished product delivery (including size, sealing, filtration efficiency, integrity testing, etc.).


Performance testing: Key products will undergo actual working condition simulation testing.


Compliance with standards: Our production and products comply with [e.g.: ISO 9001].


Customized verification: For customized filter elements, we will confirm key performance indicators with customers and provide test reports (if necessary).

Can metal cartridges be cleaned and reused, and how many cycles should I expect?

Yes . Reusability is usually the whole economic case, and it comes with two hard rules.


* Methods — Reverse-flow backflush at 1.5–2× service rate, ultrasonic cleaning in mild alkaline detergent, caustic or acid CIP, and calcination or steam for carbon and polymer residues.


* Never brush or scrape — That smears the pore structure and drives contamination deeper instead of out.


* Stay inside the chloride limit — 304 will pit at the weld in chloride-bearing water long before the media fails.


* Track the clean ΔP — Once it sits 30–50% above the original baseline, the pore structure is degrading rather than fouling — the cartridge is finished.

What is the difference between nominal and absolute micron ratings on metal media?

The two words are not interchangeable, and the gap between them is where process upsets come from.


- Nominal — Means 90–95% of particles above the stated size are retained, usually with no defined test method behind the claim.


- Absolute — Means 99.9% or better, verified by a defined method — bubble point to ISO 4003, glass-bead challenge, or a recognised particulate challenge.


- Ask which method — Metal ratings are normally derived from bubble-point pore size, so the method is the number.


- Why it matters — A mesh sold as 10 µm nominal will comfortably pass 25 µm particles. Irrelevant for a coarse strainer; fatal upstream of a spin pack or a membrane.

How do I specify a metal cartridge for polymer melt filtration?

Two numbers decide whether the cartridge survives: start-up ΔP, and collapse rating against the screen changer’s maximum.


* Process data — Polymer type (PET, PP, PA6, PE), melt temperature, viscosity at that temperature, throughput in kg/h, allowable pressure build-up.


* Hardware — Screen changer, spin pack or candle housing, with its pressure rating.


* Design on start-up, not steady state — Cold polymer can produce five to ten times the service differential pressure.


* No fibre release — Sintered powder or sintered mesh, not woven cloth, downstream of an extruder.

What do you need for a custom end connection, thread or flange?

Flange standards cause more rework than any other single item on a custom order.


* Dimensions : OD, ID, overall length, thread or flange specification and bolt circle. A drawing, or a photo with a caliper in frame, is enough.


* Connection and seal : M30×1, M36×2, BSP or NPT thread, ANSI or DIN flange, quick connector, bayonet — plus seal type and material.


* Duty : Media and rating, flow, allowable ΔP, temperature, pressure, quantity.

Which filter media should I use for my dust — polyester, anti-static, fiberglass, paper or non-woven?

Match the media to the dust chemistry and to how the collector cleans. Price is the last criterion.


- Polyester needle felt — to about 130 °C — General dry dust. The default choice, and the right starting point for most collectors.


- PTFE-laminated polyester — to about 130 °C — Fine or sticky fume, where dust must not key into the depth of the felt.


- Anti-static polyester, carbon or stainless fibre — to about 130 °C — Combustible dust, and any stream where charge build-up makes the cartridge hold dust it should have released.


- Fiberglass — to about 250 °C — High temperature, and any duty requiring H13 or H14 efficiency.


- Paper or cellulose — Coarse pre-filtration where cost dominates.


- Non-woven synthetic blends — Abrasive or moisture-laden streams.

Does a higher pleat count always mean better performance?

More pleats means more area — until the pleats crowd and cleaning can no longer reach the pleat root.


* What you gain — Lower face velocity, and therefore lower differential pressure at a given flow.


* What you lose — The gaps close under load, the cartridge blinds from the inside out, and the extra area is wasted.


* The metric that matters — Pleat pitch against dust loading: fine sticky dust wants wide spacing, free-flowing granular dust tolerates tight packing.


* Also check — Pleat depth against cage inside diameter. Deep pleats in a small cartridge fold over and create a dead zone that never cleans.

Why do my cartridges fail before their rated life, and how can I extend it?

Four modes account for most premature change-outs, and the fixes sit upstream of the cartridge.


* Media burst or abrasion — High inlet velocity, a missing deflector, or pulse pressure over about 6 bar at the venturi.


* Cage collapse — Differential pressure above rating, or water ingress.


* Adhesive or gasket failure — Temperature past the glue’s limit, or solvent attack.


* Rust-through — Galvanised cages in condensing streams.

What is the difference between a coalescer filter and a separator filter?

They are two distinct technologies often used together to remove liquids from a gas or liquid stream. The key difference is their core function:

* A Coalescer Filter merges tiny, invisible liquid droplets into large, heavy ones.

* A Separator Filter catches and drains those large droplets from the flow.

How They Work:

* Coalescer: The stream passes through a special media (like fine fibers). Microscopic aerosol droplets collide and merge (coalesce) into drops large enough to drain. It solves the problem of suspended mist.

* Separator: The flow then enters a chamber with baffles or vanes. The now-large droplets hit the surfaces, fall out by gravity, and collect in a sump. It provides the final, clean separation.

When do I need fiberglass or stainless instead of polyester, and how do I handle sparks?

Above roughly 130 °C continuous, polyester is out — and the gasket and cage need checking at the same time.

* Next step up — Fiberglass holds to about 260 °C; stainless or ceramic options go further.

* The weak link changes — Often the media survives and the glue line fails first, so the temperature rating must cover the whole assembly.

* Sparks — Welding, grinding, biomass boilers, foundry: a spark arrestor or pre-settling chamber upstream is mandatory. Fiberglass resists heat, not molten metal impingement.

* Condensing streams — Acid dew point corrodes cages faster than it destroys media, and a rusted cage collapses into the fan.
373-5471699
info@huahangfilter.com
+86 16690927259

    X