The Custom Made Air Dust Filters Cartridge，Mainly used for air filtration in engineering locomotives, automobiles, agricultural locomotives, laboratories, aseptic operating rooms and various precision operating rooms.

Specification：

Installation and use:

1. During installation, whether it is flanged or rubber tube connected or directly connected between the air filter and the engine intake pipe, it must be tight and reliable to prevent air leakage. Rubber gaskets must be installed on both ends of the filter; fixed air filtration The wing nut of the outer cover cannot be over tightened to avoid crushing the paper filter.

2. During maintenance, the paper filter must not be cleaned in oil, otherwise the paper filter will fail and it will easily cause a flying accident. For maintenance, use only the vibration method, soft brush removal (to follow the wrinkle brush) or compressed air back-blowing to remove dust and dirt adhering to the surface of the paper filter. For the part of the strainer, the dust at the dust collecting part, the blade and the cyclone tube should be removed in time. Even if it can be carefully maintained every time, the paper filter can not fully restore its original performance, and its intake resistance will increase. Therefore, when the paper filter needs to be subjected to the 4th maintenance, the new filter should be replaced. If the paper filter has cracked, perforated or degreased filter paper and end cap, it should be replaced immediately.

3. When using, it is necessary to prevent the air filter from being wet by rain, because once the paper core absorbs a large amount of water, it will greatly increase the air intake resistance and shorten the mission. In addition, the paper core air filter cannot be in contact with oil and fire.

features：