.jpg)
High Flow Water Filter
1.The gradient structure of aperture.
2.Filtered water, a filter flow up to 110m3/H.
3.The maximum size of filter system can be reduced by 50%
4.Can provide20inch/508mm,40inch/1016mm and 60inch/1524mm the length of filter.
5.From the inside out flowing direction to ensure that all impurities trapped inside the filter element
Products
Tel: 0086-373-5471699
Fax: +86-373-5471026
Email: info@huahangfilter.com
Address: Industrial Park, Dazhaoying Town，Xinxiang City ,Henan Province ,China
High Flow Water Filter is one types of customize water filter according to customers’ requirements for water filtration. It is a large diameter, coreless, single open ended, pleated cartridge with an inside-to-outside flow pattern. And it is much faster, easier filter changeouts.
Features and Benefits
6” Diameter, large geometry for high flow rates
Multi layer pleated construction with optimized surface area
Thermally bonded construction
High flow rates per element
Low cost of installation and filtration
Handle for easy filter replacement
Specifications
Filter Grades
1.5,3,4,5,10,20,30,70 micron
Medias of Construction
|
Filter Media |
Polypropylene,Fiberglass, Polyester, Nylon |
|
Support |
Polypropylene |
|
End Caps |
10% glass fiber reinforced polypropylene |
|
Center Core(60” length only) |
Polypropylene |
|
O-ring Options |
Nitrile,NBR |
|
Cartridge Length |
20”, 40”, 60” |
|
Cartridge max OD |
6.3” |
Applications
Water Systems
Chemicals
Food and Beverage
Pre RO
Quality
Cartridges produced in a controlled environment.
Manufactured according to CE and ISO 9001:2008 Certified Quality Management system.
If you have any suggestions or opinions about our products,please leave a message,and we will immediately answer your questions. Thanks for your support.
